386

The Silver Series 386 dual channel tube mic preamp puts the best of both worlds into one affordable package by combining the warmth of the irreplaceable vacuum tube with the proprietary dbx® Type IV™ conversion system. The 386 boasts many of the same features as other products in the Silver Series, such as +48V phantom power, a phase invert switch, and low cut filtering; but also includes digital outputs in both AES/EBU, and S/PDIF formats.

The high impedance, 1/4" instrument input located on the front panel, as well as the mic/line switch, and 20 dB pad show our dedication to providing convenience in the studio. The 12 segment LED meters provide a visual indication of analog or digital levels at a glance. The rear panel includes both mic and line inputs and outputs, word clock sync input and output, and digital outputs. Add selectable sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz; selectable dithering and noise shaping; and separate analog and digital output controls to this already impressive list of features, and we think you’ll agree that the 386 lives up to the innovative dbx® standards.

Features

  • Two channel tube microphone preamplifier
  • Selectable 96kHz, 88.2kHz, 48kHz, or 44.1kHz sampling rate
  • 24, 20, and 16-bit wordlengths
  • Selectable dither and noise shaping
  • AES/EBU and S/PDIF digital outputs
  • Word clock sync input and output
  • Separate analog and digital output control
  • Type IV™ conversion system
  • 60dB of gain and +/- 15dB of output gain
  • Selectable mic/line switch
  • 48 volt phantom power
  • 20dB pad
  • 75Hz low cut filter
  • Phase reverse
  • Segment LED analog/digital

Specifications

Mic Preamp Connector Female XLR Pin 2 Hot; Electronically balanced/unbalanced
Mic Preamp Input Impedance 330Ω
Mic Preamp max input level -9 dBu or +11 dBu with 20 dB pad engaged
CMRR >40dB, Typically 55dB
Mic Preamp Equivalent Input Noise (EIN) Typically -120 dBu with a 150Ω source load, 20Hz to 20kHz BW
Input Connectors (instrument/line) 1/4" Jack
Input Type (line) Electronically balanced/unbalanced; (instrument) Unbalanced
Max Input (instrument/line) +21dBu balanced or unbalanced
Gain Adjustment Range (drive control) Line/Instrument: -15dB to +15dB; Mic: +30dB to +60dB
Output Connectors Male XLR Pin 2 Hot and TRS 1/4"
Output Type Servo-balanced/unbalanced
Output Impedance Balanced 120Ω, unbalanced 60Ω
Max Output >+21 dBu, >+20 dBm (into a 600Ω load)
Digital Output Connector XLR for AES/EBU, RCA for S/PDIF
Digital Output Impedance 110Ω for AES/EBU, 75Ω for S/PDIF
Word Sync I/O Connectors BNC
Word Sync Input Impedance 75Ω terminated by internal jumper
Word Sync Input 96, 88.2, 48, or 44.1kHz word clock
Word Sync Output 96, 88.2, 48, or 44.1kHz word clock
Output Level -15dB to +15dB
Line Switch Selects between microphone and line inputs
Mic Preamp Phantom Power +48V
Pad Switch 20dB pad
Phase Invert Switch Reverses pins 2 and 3 of the microphone input XLR
Low cut Switch 75Hz, 12dB/octave high pass filter
Frequency Response (analog) <10Hz to 75kHz
THD+Noise 0.35% typical at +4dBu out, 1kHz, 40 dB gain
Interchannel Crosstalk Typically –80dB, 20Hz to 20kHz
A/D Converter dbx® Type IV® A/D Conversion System
Sample Rate 96, 88.2, 48, or 44.1kHz selectable
Wordlength 24, 20, or 16 bit selectable
Dither Type TPDF, SNR2, or none
Noise Shape Shape 1, Shape 2, or none
Digital Output S/PDIF or AES/EBU
Digital Output Dynamic Range 107dB typical, A-weighted, 22kHz bandwidth
Operating Voltage DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz
Power Consumption 35W
Dimensions 1.75'' x 7.75'' x 19'' (4.5cm x 19.7cm x 48.5cm)
设备重量 6.89 lbs (3.17kg)
Reference 0dBu = -16dFS, 0dBu-0.775Vms